포인터가 화면을 너무 빨리 가로지르거나, 커서 색상으로 인해 찾기가 어렵거나, 실수로 앱을 확대했을 수도 있습니다. Mac 커서와 마우스 제스처를 사용자 정의하여 원하는 대로 보이고 작동
할 수 있습니다 .
대신 트랙패드 제스처에 관심이 있다면 macOS에서 트랙패드를 사용자 정의하는(customize the trackpad on macOS) 방법을 살펴보세요 .
참고: 일부 사용자 정의에서는 Magic Mouse를 사용(using a Magic Mouse) 한다고 가정합니다 .

마우스 속도 변경
마우스를 움직일 때 포인터가 너무 빨리 움직여서 흐릿하게 보입니까? 반면에 너무 느리게 움직여서 따라잡기를 기다리면서 손가락을 두드릴 수도 있습니다. 마우스를 사용할 때 커서의 추적 속도를 변경할 수 있습니다.
- Dock 의 아이콘 이나 메뉴 막대의 Apple 아이콘을 사용하여 (Apple)시스템 설정을(System Settings) 엽니다 . 왼쪽에서 마우스를 선택합니다 . (Choose Mouse)macOS Ventura(Ventura) 이전 운영 체제 버전에서는 시스템 환경설정(System Preferences) 에서 마우스 설정을 찾을 수 있습니다 .
- 오른쪽에서 포인트(Point) 앤 클릭 을(Click) 선택합니다 .
- 추적(Tracking) 속도 슬라이더를 사용하여 커서가 움직이는 속도를 조정합니다.

한 번에 한 번의 클릭으로 슬라이더를 이동한 다음 마우스를 움직여 속도를 확인해보세요.
오른쪽(Right) 및 왼쪽 마우스 버튼(Left Mouse Buttons) 전환
마우스 버튼을 바꾸는 가장 일반적인 이유 중 하나는 왼손잡이용입니다. 이렇게 하면 기본(오른쪽) 버튼이 검지로 쉽게 닿을 수 있는 위치에 배치되고 보조 버튼은 왼쪽에 배치됩니다. 이는 macOS에서의 간단한 변경 사항입니다.
- 시스템 설정을(System Settings) 열고 마우스 를(Mouse) 선택합니다 .
- 포인트 앤 클릭을 선택합니다.
- 보조(Secondary) 클릭 옆에 있는 드롭다운 메뉴를 사용하여 왼쪽 클릭 을(Click Left Side) 선택합니다 .

그런 다음 마우스 버튼을 사용해 보십시오. 마우스 오른쪽 버튼이 기본 버튼이고 왼쪽 버튼이 보조 버튼으로 있어야 합니다.
마우스 중앙을 사용하는 방법이 궁금하십니까? Mac 마우스나 트랙패드를 사용하여 마우스 가운데
버튼을 클릭하는 방법을(how to middle-click) 알아보세요 .
포인터 색상 변경
커서 색상으로 기본 검정색을 사용하는 것은 문제가 없지만 좀 더 눈에 띄거나 좋아하는 색상을 원할 수도 있습니다. 예, macOS의 포인터 색상을 원하는 거의 모든 것으로 변경할 수 있습니다.
- 시스템 설정을(System Settings) 열고 접근성을(Accessibility) 선택합니다 .
- Vision 아래에서 디스플레이를 선택합니다.

- (Move)포인터(Pointer) 섹션 의 아래쪽으로 이동합니다 .
- (Pick)포인터(Pointer) 윤곽선 색상 및/또는 포인터(Pointer) 채우기 색상 오른쪽에 있는 색상 버튼을 선택하여 하나 또는 둘 다를 변경합니다.

- 색상(Colors) 상자가 열리면 상단의 탭을 사용하여 기본 색상, 스펙트럼 또는 색연필 음영 중에서 선택할 수 있습니다.

사용자 정의 커서 색상 사용
앱이나 웹페이지 등 화면의 색상을 사용하여 사용자 정의 색상을 선택할 수도 있습니다.
- 색상(Colors) 창 하단에 있는 스포이드를 선택하여 화면의 색상을 선택합니다. 그런 다음 커서를 색상으로 이동하고 클릭합니다.

- 새 커서 색상이 하단의 팔레트와 포인터에 나타납니다.

- 완료되면 왼쪽 상단의 X를 사용하여
색상 상자를 닫습니다.(Colors)
팁: 검정색 채우기 및 흰색 윤곽선을 사용하여 기본 설정으로 돌아가려면 Settings > Accessibility > Display포인터(Pointer) 섹션
에서 색상 (Colors)재설정(Reset) 을 선택하세요 .
포인터 크기 조정
커서를 더 쉽게 볼 수 있도록 색상뿐만 아니라 크기도 변경할 수 있습니다. 포인터를 더 크고 간단하게 만들 수 있기 때문에 연로한 친구나 가족을 위해
Mac을(Mac) 설정하는 경우에도 유용합니다 .
- 시스템 설정을(System Settings) 열고 접근성을(Accessibility) 선택합니다 .
- Vision 아래에서 디스플레이를 선택합니다.
- 포인터(Pointer) 섹션 의 아래쪽으로 이동합니다 .
- 포인터(Pointer) 크기 옆의 슬라이더를 사용하여 커서를 얼마나 크게 또는 작게 만들지 선택합니다.

포인터 속도를 변경하는 것과 마찬가지로 슬라이더를 한 번에 한 번 클릭하여 움직여 설정 을(Settings) 닫기 전에 커서 크기가 얼마나 잘 작동하는지 확인할 수 있습니다 .
흔들어서 포인터를 찾으
세요(Shake)
포인터를(spot your pointer) 빠르게 찾는 또 다른 방법은 흔들어서(Shake) 찾기 기능을 사용하는 것입니다 . 이는 컴퓨터에서 물러났을 때 컴퓨터로 돌아왔을 때 커서를 어디에 두었는지 확실하지 않은 경우에 유용합니다.
마우스를 좌우로 흔들면 커서가 잠시 동안 크게 나타나 쉽게 찾을 수 있습니다.
- 시스템 설정을(System Settings) 열고 접근성을(Accessibility) 선택합니다 .
- Vision 아래에서 디스플레이를 선택합니다.
- 포인터 섹션으로 이동하세요.
- 마우스(Shake) 포인터를 흔들어 위치를 찾으려면 토글을 켭니다 .

그런 다음 시도해 보세요. 마우스를 좌우로 빠르게 흔들면 포인터가 표시됩니다.
스마트 줌 활성화 또는 비활성화
Mac 용 Magic Mouse가(Magic Mouse) 있는 경우 Smart Zoom 이라는 앱에서 확대할 수 있는 편리한 기능이 있습니다 . 이 기능을 켜면 한 손가락으로 마우스를 두 번 탭하여 확대할 수 있습니다.
어떤 사람에게는 편리하지만 다른 사람에게는 성가실 수도 있습니다. 스마트 줌을(Zoom) 활성화 또는 비활성화하는 방법은 다음과 같습니다 .
- 시스템 설정을(System Settings) 열고 마우스 를(Mouse) 선택합니다 .
- 포인트 앤 클릭을 선택합니다.
- 스마트(Smart) 줌 옆에 있는 토글을 사용하여 기능을 켜거나 끕니다. 파란색(Blue) (또는 다른 강조 색상)은 켜짐을 의미하고 회색은 꺼짐을 의미합니다.

켜거나 끌 때 마우스 상단을 두 번 탭하여 스마트 줌(Smart Zoom) 사용 여부를 확인하세요 .
기타 마우스 제스처 사용자 정의
위와 함께 커서와 마우스에 대한 더 많은 사용자 정의 옵션이 있습니다. System Settings > Mouse 로 이동 하고 다음 옵션을 사용하여 마우스 작동 방식을 변경합니다.
자연스러운 스크롤: 스크롤할 때 마우스가 손가락 움직임을 추적한 다음 같은 방향으로 움직이도록 하려면 이 설정을 활성화합니다.

페이지 간 스와이프(Swipe) : 문서에서 페이지를 이동하는 방법에 대한 설정을 선택합니다. 한 손가락으로 왼쪽 및 오른쪽으로 스크롤하거나, 두 손가락으로 왼쪽 및 오른쪽으로 스와이프하거나, 한 손가락 또는 두 손가락으로 스와이프하거나, 설정을 끌 수 있습니다.

(Swipe)전체 화면 애플리케이션 간
스와이프 : 이 설정을 활성화하면 두 손가락으로 왼쪽 및 오른쪽으로 스와이프하여 전체 화면 모드에서 앱 간을 전환할 수 있습니다.
Mission Control : 두 손가락으로 두 번 탭하여 Mission Control을(Mission Control) 열려면 이 설정을 활성화합니다 .

간단한 변화로 모든 변화를 만들 수 있습니다(Difference)
몇 가지 간단한 변경으로 마우스나 포인터의 작동 방식을 개선할 수 있습니다. 아주 작은 조정만으로도 경험이 향상될 수 있습니다. 기본적인 색상 변경이든, 페이지 간 손쉬운 스와이프이든, 단 몇 단계만으로
Mac 마우스와 커서를 사용자화할 수 있습니다.(Mac)
자세한 내용은 컴퓨터의
생산성 향상을 위해 트랙패드 대신 마우스를 사용하는 방법을 살펴보세요.(mouse versus a trackpad for better productivity)
How to Customize the Cursor and Mouse on Mac
Maybe your pointer zіps across the sсreen too fast, the cursor color makes it hard to find, or уou accidentally zoоm in on apрs. You cаn customize the Mac cursor аnd mouse gestures to loоk and behave as yoυ like.
If you’re interested in trackpad gestures instead, look at how you can customize the trackpad on macOS.
Note: Some of the customizations assume you’re using a Magic Mouse.

Change the Mouse Speed
When you move your mouse, does the pointer move so fast it’s just a blur? On the other hand, maybe it moves so slow that you tap your fingers waiting for it to catch up. You can change the tracking speed of the cursor when using your mouse.
- Open System Settings using the icon in your Dock or Apple icon in the menu bar. Choose Mouse on the left. On older operating system versions before macOS Ventura, you’ll find your mouse settings in System Preferences.
- To the right, select Point & Click.
- Use the Tracking speed slider to adjust how fast or slow the cursor moves.

Try moving the slider one click at a time and then checking the speed by moving your mouse.
Switch the Right and Left Mouse Buttons
One of the most common reasons to swap the mouse buttons is for left-handed use. This places the primary (right) button in easy reach of your index finger with the secondary button to the left. This is a simple change on macOS.
- Open the System Settings and choose Mouse.
- Select Point & Click.
- Next to Secondary click, use the drop-down menu to pick Click Left Side.

Then, give your mouse buttons a try. You should have the right mouse button as the primary and the left as the secondary.
Wondering how to use the center of your mouse? Check out how to middle-click using your Mac mouse or trackpad.
Change the Pointer Color
While there’s nothing wrong with basic black for your cursor color, maybe you want something more prominent or even your favorite color. Yes, you can change the pointer color on macOS to almost anything you want.
- Open the System Settings and choose Accessibility.
- Below Vision, select Display.

- Move toward the bottom to the Pointer section.
- Pick the color button to the right of Pointer outline color and/or Pointer fill color to change one or both.

- When the Colors box opens, you can use the tabs at the top to pick from a basic color, the spectrum, or shades of colored pencils.

Use a Custom Cursor Color
You can also pick a custom color using a color on your screen, whether in an app or on a web page.
- Select the eyedropper at the bottom of the Colors window to choose a color on your screen. Then, move the cursor to the color and click.

- The new cursor color appears in the palette at the bottom and on your pointer.

- When you finish, close the Colors box using the X on the top left.
Tip: If you want to return to the default settings using a black fill and white outline, return to Settings > Accessibility > Display and select Reset Colors in the Pointer section.
Adjust the Pointer Size
To make the cursor easier to see, you can change not only the color but the size as well. This is also helpful if you’re setting up a Mac for an elderly friend or family member because you can make the pointer larger and simpler.
- Open the System Settings and choose Accessibility.
- Beneath Vision, select Display.
- Go toward the bottom of the Pointer section.
- Use the slider next to Pointer size to choose how large or small to make the cursor.

Like changing the pointer speed, you can move the slider one click at a time to see how well the cursor size works for you before you close the Settings.
Turn on Shake to Locate the Pointer
Another way to quickly spot your pointer is using the Shake to Locate feature. This is handy if you step away from your computer and aren’t sure where you left your cursor when you return.
You can shake your mouse from side to side to make the cursor appear large for a brief moment, making it easy to find.
- Open the System Settings and select Accessibility.
- Below Vision, choose Display.
- Head to the Pointer section.
- Turn on the toggle for Shake mouse pointer to locate.

Then, give it a try — shake your mouse from side to side quickly and you should spot your pointer.
Enable or Disable Smart Zoom
If you have a Magic Mouse for your Mac, there is a convenient feature for zooming in on an app called Smart Zoom. With this feature turned on, you can double-tap your mouse with one finger to zoom in.
While convenient for some, it can be annoying to others. Here’s how to enable or disable Smart Zoom.
- Open the System Settings and choose Mouse.
- Select Point & Click.
- Next to Smart zoom, use the toggle to turn the feature on or off. Blue (or another accent color) means on and gray means off.

Whether you turn it on or off, give your mouse a nice double-tap on the top and see how you like using or not using Smart Zoom.
Customize Other Mouse Gestures
Along with the above, there are more customization options for your cursor and mouse. Go to System Settings > Mouse and use the following options to change how your mouse behaves.
Natural scrolling: Enable this setting to have your mouse track your finger movement when scrolling and then move in the same direction.

Swipe between pages: Choose a setting for how to move through pages in a document. You can scroll left and right with one finger, swipe left and right with two fingers, swipe with one or two fingers, or turn the setting off.

Swipe between full-screen applications: Enable this setting to swipe left and right with two fingers to switch between apps in full-screen mode.
Mission Control: Enable this setting to open Mission Control by double-tapping with two fingers.

Simple Changes Can Make All the Difference
You can improve how your mouse or pointer works with a few simple changes. Even tiny tweaks can enhance your experience. Whether it’s a basic color change or an easy swipe between pages, you can customize your Mac mouse and cursor in just a few steps.
For more, look at using a mouse versus a trackpad for better productivity on your computer.