Wi-Fi 는 최신 컴퓨터의 핵심이지만 Windows 11 (또는 Windows 10!) 에 Wi-Fi 연결 옵션 이 표시되지 않는 경우가 있습니다. 이로 인해 케이블 없이는 인터넷이나 LAN 리소스에 연결할 수 없습니다.
다음은 가장 보편적인 문제 해결 팁부터 시작하여 Wi-Fi 문제를 해결하고 즉시 온라인 상태로 돌아갈 수 있는 가장 가능성 있는 몇 가지 팁입니다.

1. PC 재부팅
맞습니다. 컴퓨터를 다시 시작하면 됩니다. 많은 경우 무선 네트워크 이상은 재부팅 후 신비하게 사라집니다.
2. 비행기 모드가 켜져 있습니까?
Windows 11에는 컴퓨터의 모든 무선 전송 장치를 끄는 비행기 또는 "비행" 모드 설정이 있습니다. (Airplane)여기에는 Wi-Fi 및 Bluetooth 가 포함되므로 실수로 컴퓨터를 (Bluetooth)비행기(Airplane) 모드 로 전환하지 않았는지 확인하는 것이 좋습니다 .
Windows + A 를 누르 거나 알림 영역에서 스피커(speaker) 를 마우스 왼쪽 버튼으로 클릭 할 수 있습니다.

비행 모드 버튼(Flight mode button) 에 불이 들어오지 않아야 합니다. 그렇다면 한 번 클릭하거나 탭하십시오.
3. 네트워크 문제 해결사 실행
Windows 11에는 명령 프롬프트(Command Prompt) 에 의존하지 않고 일반적인 문제의 검색 및 복구를 자동화하는 여러 기본 제공 문제 해결사가 있습니다. 다음과 같이 네트워크 문제 해결사(Network Troubleshooter) 를 사용할 수 있습니다 .
- 시작 메뉴(Start Menu) 를 엽니다 .
- 설정 톱니바퀴(Settings Cog) 를 선택하여 설정(Settings) 을 엽니다 .

- 오픈 시스템(System) .
- 문제 해결(Troubleshoot) 을 엽니 다.

- 다음으로 기타 (Other) 문제 해결사(Troubleshooters) 를 선택 합니다.

- 인터넷 연결(Internet Connections) 옆에 있는 실행(Run) 을 선택 합니다 .

이제 인터넷 연결 문제(troubleshoot your internet connection) 를 해결 하는 옵션을 선택하고 화면의 지시를 따릅니다.

발견한 문제와 해결할 수 있는지 여부를 알려줍니다.
4. 안전 모드로 부팅(Boot Into Safe Mode) (또는 이더넷 사용(Use Ethernet) )
일부 문제 해결 단계에는 인터넷 연결이 필요하거나 지금 인터넷에 연결하고 나중에 Wi-Fi 를 수정해야 할 수도 있습니다. (Wi-Fi)이를 수행하는 두 가지 방법이 있습니다.
먼저 Windows 11(Windows 11) 을 안전 모드(Safe Mode) 로 부팅할 수 있습니다 . 이 모드에서는 시작 시 타사 앱이 로드되지 않으며 Windows 는 일반 네트워크 어댑터 드라이버를 사용합니다. Wi-Fi가 안전 모드(Safe Mode) 에서 작동하는 경우 문제가 드라이버와 관련되어 있을 가능성이 높으므로 드라이버를 업데이트해야 할 수 있습니다. 특정 지침 은 안전 모드에서 Windows 11을 시작하는 방법을(How to Start Windows 11 in Safe Mode) 참조 하십시오.
두 번째 옵션은 이더넷(Ethernet) 연결로 전환하는 것입니다. 가장 가까운 콘센트에서 Windows 11 PC로 이더넷 케이블 을 연결합니다.(Ethernet)
5. Wi-Fi가 활성화되어 있는지 확인
Wi-Fi 가 처음부터 켜져 있습니까? 여러 가지 방법으로 끌 수 있습니다. 먼저 (First)Windows 11 자체 에서 알림 영역에서 빠른 설정 버튼을 선택할 수 있습니다. 그러면 Windows 에서 (Windows)Wi-Fi 토글 스위치 가 나타납니다 . 전원을 켜고 정상으로 돌아가는지 확인하십시오.

랩톱을 사용하는 경우 컴퓨터 측면에 하드웨어 스위치가 있거나 Wi-Fi 기능을 위한 키보드 단축키가 있습니다. BIOS 수준 에서 Wi-Fi 가 비활성화되어 있으면 Windows 에서(Windows) 하드웨어를 사용할 수 없습니다.
버튼의 위치가 있는 경우 노트북 설명서를 확인해야 합니다. 키보드(Keyboard) Wi-Fi 토글은 일반적으로 Fn 키(Fn key) 를 누른 상태에서 Wi-Fi 아이콘이 있는 해당 키를 눌러 작동합니다.
6. Wi-Fi 연결 활성화
어떤 이유로 Windows 11 자체 에서 Wi-Fi 연결이 비활성화될 수 있습니다 . 문제를 확인하고 해결하는 방법은 다음과 같습니다.
- Windows 키로 시작 메뉴(Start Menu) 를 엽니다 .
- 제어판(Control Panel) 을 입력 한 다음 Enter 키(Enter) 를 누릅니다 .

- 네트워크 및 인터넷(Network and Internet ) > 네트워크 및 공유 센터( Network and Sharing Center) 로 이동합니다 .


- 어댑터 설정 변경 을(Change adapter settings) 선택 합니다.

여기에서 모든 네트워크 연결과 연결된 모뎀을 볼 수 있습니다.

올바른 네트워크 어댑터에 대해 나열된 Wi-Fi 연결을 찾습니다. 대부분의 시스템에는 하나만 있습니다. 회색으로 표시되고 "사용 안 함" 레이블이 지정된 경우 해당 항목을 마우스 오른쪽 버튼으로 클릭하고 사용(Enable) 을 선택하기만 하면 됩니다.
7. Wi-Fi 어댑터가 연결 되어 있는지 확인(Adapter Is Plugged)
USB 기반 WiFi 어댑터를 사용하는 경우(데스크톱 시스템을 사용하는 경우일 가능성이 있음) 올바르게 연결되어 있는지 확인합니다.

다른 컴퓨터에서 시도하여 여전히 작동하는지 확인할 수도 있습니다. 다른 USB 포트도 사용해 보십시오. 포트 자체에 문제가 있는 경우.
8. 장치 관리자(Device Manager) 에서 네트워크 어댑터 확인(Network Adapter)
장치 관리자(Device Manager) 응용 프로그램 은 컴퓨터의 모든 하드웨어 목록과 올바르게 작동하는지 여부를 보여줍니다.
- 시작 메뉴(Start Menu) 를 엽니다 .
- 장치 관리자(Device Manager) 를 입력 합니다.
- 검색 결과에서 장치 관리자(Device Manager) 를 엽니 다.
확장하려면 컴퓨터 범주를 두 번 클릭해야 할 수 있습니다.

네트워크 어댑터 섹션을 검색하고 확장하여 모든 네트워크 어댑터를 확인합니다.
네트워크 어댑터 목록에서 Wi-Fi 어댑터를 찾아 노란색 느낌표와 같은 경고 아이콘이 있는지 확인합니다. 어댑터를 마우스 오른쪽 버튼으로 클릭하고 특정 오류 메시지에 대한 속성을 확인하십시오.
장치 관리자에 어댑터가 완전히 없으면 하드웨어 수준 문제 또는 어댑터가 감지되지 않는 이유를 나타냅니다. 어댑터가 안전 모드(Safe Mode) 에서만 작동하는 경우 소프트웨어 또는 드라이버와 관련이 있을 수 있습니다.
어댑터 아이콘에 빨간색 십자가가 있는 경우 어댑터를 마우스 오른쪽 버튼으로 클릭하고 활성화(Enable) 를 선택 합니다. 이것이 불가능한 경우 장치를 마우스 오른쪽 버튼으로 클릭하고 제거를 선택하여 장치를 제거할 수 있습니다. 그런 다음 컴퓨터를 재부팅하여 하드웨어를 다시 감지하십시오.
9. Wi-Fi 드라이버 업데이트, 롤백(Roll Back) 또는 재설치
대부분의 경우 하드웨어 드라이버가 잘못되어 Wi-Fi가 작동을 멈춥니다. 제조업체 웹 사이트에서 최신 드라이버를 다운로드하여 설치하거나 장치 관리자의 어댑터 속성에서 드라이버 롤백을 사용하거나 드라이버를 완전히 제거하고 작동한 최신 버전 또는 마지막 버전을 다시 설치해야 합니다.
10. "네트워크 재설정" 기능 사용
Windows 를 재설정하거나 다시 설치 하는 것이 대부분의 문제를 해결하는 효과적인 방법이지만 불안정한 Wi-Fi 와 같은 사소한 문제에는 약간 과잉입니다 . 다행히(Luckily) 네트워크 설정 만(only ) 재설정할 수 있습니다 .
- 시작 메뉴(Start Menu) 를 엽니다 .
- 설정 톱니(Settings Cog) 를 선택하여 설정 앱(Settings app) 을 엽니다 .
- 네트워크 및 인터넷 을(Network and Internet) 선택합니다 .
- 이제 고급 네트워크 설정을(Advanced network settings) 선택합니다 .

- 마지막으로 네트워크 재설정(Network reset) 을 선택한 다음 지금(reset now) 재설정 을 선택합니다 .


그러면 모든 네트워크 및 어댑터 설정이 재설정됩니다. 재설정이 적용되었는지 확인하려면 컴퓨터를 다시 시작하십시오. VPN 연결(VPN connection) , 프록시 서버 또는 사용자 지정 DNS 설정 과 같은 특별한 네트워크 구성이 있는 경우 다시 설정해야 합니다.
11. 특정 Wi-Fi 네트워크가 표시되지 않는 경우
특정 Wi-Fi 옵션이 표시되지 않는 이유를 검색할 때 이 기사를 발견했을 가능성이 있습니다. 여기서 가장 쉬운 수정은 라우터와 컴퓨터를 재설정하여 적절한 조치를 취하는 것입니다.
라우터의 설정 페이지에 로그인하여 네트워크가 보이도록 "브로드캐스트 SSID"가 켜져 있는지 확인할 수도 있습니다.
네트워크가 표시되지만 연결할 수 없는 경우 네트워크를 잊어버리십시오.
- 시작 메뉴(Start Menu) 를 엽니다 .
- 설정 톱니(Settings Cog) 를 선택합니다 .
- 네트워크 및 인터넷(Network & Internet) 을 선택한 다음 Wi -Fi(Wi-Fi) 를 선택합니다 .

- 알려진 네트워크 관리를(Manage known networks) 선택 합니다.

- Wi-Fi 네트워크를 선택한 다음 삭제(Forget) 를 선택 합니다 .

네트워크 암호를 다시 입력해야 하지만 네트워크 설정이 손상되거나 변경된 경우 네트워크를 잊어버리면 문제가 해결되는 경우가 많습니다.
12. 윈도우 업데이트
Microsoft 는 새로운 기능, 버그 수정 및 성능 향상 으로 Windows 11을 정기적으로 업데이트합니다 . 불행히도 세상에는 너무 많은 컴퓨터가 있으므로 Windows 업데이트 덕분에 불가피하게 일부 컴퓨터에서 문제가 발생합니다.

최근 업데이트 이후에 Wi-Fi 문제가 시작된 경우 웹에서 다른 사용자에게도 이 문제가 발생하고 있는지 확인하십시오. 문제가 업데이트와 관련된 것 같으면 Windows 업데이트를 제거하고 다시 설치하는 방법을(How to Uninstall and Reinstall Windows Updates) 확인하십시오 . 그런 다음 해당 업데이트를 제거하고 문제를 해결하는 업데이트를 확인하십시오.
13. 그룹 정책 편집기(Group Policy Editor) 에서 Wi-Fi 아이콘 활성화(Icon)
Windows 11 Pro 를 사용 중이고 Wi-Fi 아이콘이 아예 없는 경우 편집기의 설정이 변경되었을 수 있습니다. 귀하가 근무하는 회사의 누군가가 귀하의 컴퓨터를 관리하는 경우 확인을 요청해야 합니다. 그런 다음 다시, IT 부서에 액세스할 수 있는 경우 먼저 Wi-Fi 문제를 해결하도록 요청해야 합니다!
- Windows + R 을 눌러 실행 대화 상자(Run dialog box) 를 엽니다 .
- gpedit.msc 를 입력 하고 Enter 키(Enter) 를 누릅니다 .

- 그룹 정책 편집기(Group Policy Editor) 에서 사용자 구성(User Configuration) 으로 이동합니다 .
- 이제 관리 템플릿(Administrative Templates ) -> 시작 메뉴 및 작업 표시줄을( Start Menu and Taskbar) 선택 합니다.
- 네트워크 제거 아이콘(Remove the networking icon) 을 찾아 엽니다.

- 아직 비활성화되지 않은 경우 창(Window) 왼쪽 상단에서 비활성화(Disabled) 를 선택 합니다.

- 확인(OK) 을 선택 하고 컴퓨터를 다시 시작합니다(restart your computer) .
이 정책이 이미 비활성화된 경우 그룹 정책 편집기(Group Policy Editor) 에서 다른 것을 변경하거나 저장하지 말고 닫고 다른 해결 방법을 시도하십시오.
더 이상 무선 걱정은 없습니다.
이것은 수정 사항의 긴 목록이지만 Wi-Fi에 정말 이상한 문제가 발생하지 않는 한 무선 연결이 다시 작동해야 합니다. Wi-Fi 연결을 더욱 개선 하려면 약한 Wi-Fi 신호를 증폭하는 10가지 방법을(10 Ways To Boost a Weak WiFi Signal) 확인하십시오 .
13 Fixes When Windows 11 Wi-Fi Not Showing Up
Wi-Fi is the lifeblood of modern computers, but sometimes the option to connect to Wi-Fi doesn’t show up in Windows 11(or Windows 10!). This makes it impossible to connect to the internet or LAN resources without a cable.
Here are some of the most likely tips to fix Wi-Fi problems and get you back online in no time, starting with the best universal troubleshooting tip of all.

1. Reboot Your PC
That’s right, just restart your computer. In many cases, any wireless network weirdness mysteriously goes away after a reboot.
2. Is Airplane Mode On?
Windows 11 has an Airplane or “flight” mode setting which turns off every radio-transmission device on your computer. That includes Wi-Fi and Bluetooth, so it’s worth checking that you haven’t accidentally toggled the computer into Airplane mode.
You can press Windows + A or left-click on the speaker in the notification area.

The Flight mode button should not be lit up. If it is, click or tap on it once.
3. Run the Network Troubleshooter
Windows 11 has a number of built-in troubleshooters that automate the detection and repair of common issues without resorting to the Command Prompt. You can use the Network Troubleshooter like this:
- Open the Start Menu.
- Select the Settings Cog to open Settings.

- Open System.
- Open Troubleshoot.

- Next select Other Troubleshooters.

- Select Run next to Internet Connections.

Now select the option to troubleshoot your internet connection and follow the on-screen instructions.

It will let you know of any issues it finds and whether it could fix them.
4. Boot Into Safe Mode (or Use Ethernet)
Some troubleshooting steps may require an internet connection or perhaps you need to get on the internet now and fix the Wi-Fi later. There are two ways to accomplish this.
First, you can boot Windows 11 into Safe Mode. No third-party apps are loaded at startup in this mode, and Windows falls back on a generic network adapter driver. If your Wi-Fi works in Safe Mode, there’s a good chance your issues are driver-related, and you may need to update drivers. Head over to How to Start Windows 11 in Safe Mode for specific instructions.
Your second option is to switch over to an Ethernet connection. Run an Ethernet cable from the nearest outlet to your Windows 11 PC.
5. Ensure Wi-Fi Is Enabled
Is your Wi-Fi toggled on in the first place? There are a number of ways it could be toggled off. First, in Windows 11 itself, you can select the quick settings button in the notification area. This will reveal the Wi-Fi toggle switch in Windows. Toggle it on and see if things go back to normal.

If you’re using a laptop, then you’ll either have a hardware switch on the side of the computer or a keyboard shortcut for Wi-Fi functionality. If Wi-Fi is disabled at the BIOS level, Windows can’t use the hardware.
You’ll have to check your laptop’s manual for the button’s location if any. Keyboard Wi-Fi toggles are usually operated by holding the Fn key and then pressing the corresponding key with a Wi-Fi icon on it.
6. Enable Your Wi-Fi Connection
Your Wi-Fi connection may be disabled in Windows 11 itself for some reason. Here’s how to check for and fix the issue:
- Open the Start Menu with the Windows key.
- Type Control Panel and then press Enter.

- Go to Network and Internet > Network and Sharing Center.


- Select Change adapter settings.

Here you’ll see all of your network connections and connected modems.

Look for a Wi-Fi connection listed for the correct network adapter. In most systems, there will be only one. If it’s grayed out and labeled “Disabled,” simply right-click on it and select Enable.
7. Check if Your Wi-Fi Adapter Is Plugged In
If you’re using a USB-based WiFi adapter, which is likely if you’re on a desktop system, make sure it’s plugged in correctly.

You may also want to try it on a different computer to ensure it still works. Try using a different USB port as well. In case there’s something amiss with the port itself.
8. Check Your Network Adapter in Device Manager
The Device Manager application shows you a list of all the hardware in your computer and whether they work correctly or not.
- Open the Start Menu.
- Type Device Manager.
- Open Device Manager from the search results.
You may have to double-click the computer category to expand it.

Search for the network adapters section, and expand that to see all of your network adapters.
Look for your Wi-Fi adapter in the list of network adapters and check whether it has a warning icon on it, such as a yellow exclamation mark. Right-click on the adapter and check its properties for specific error messages.
If the adapter is completely absent from the device manager, it indicates a hardware-level issue or why the adapter isn’t being detected. If the adapter works in Safe Mode only, it may be related to software or drivers.
If the adapter has a red cross through its icon, right-click on it and select Enable. If that’s not possible, you can uninstall devices by right-clicking on them and selecting uninstall. Then reboot your computer to detect the hardware again.
9. Update, Roll Back or Reinstall Your Wi-Fi Drivers
Most often, your Wi-Fi stops working because the hardware driver has gone wrong. You’ll either have to download and install the latest driver from the manufacturer’s website, use driver roll-back in the adapter’s properties under device manager, or uninstall the driver completely and reinstall the newest version or the last version that worked.
10. Use the “Reset Network” Function
While resetting or reinstalling Windows is an effective way to solve most problems, it’s a bit overkill for something minor like wonky Wi-Fi. Luckily you can reset only the network settings:
- Open the Start Menu.
- Select the Settings Cog to open the Settings app.
- Choose Network and Internet.
- Now choose Advanced network settings.

- Finally, choose Network reset and then reset now.


This will reset all of your network and adapter settings. Restart your computer to make sure the reset has taken effect. If you have any special network configurations, such as a VPN connection, proxy server, or custom DNS settings, you’ll have to set them up again.
11. If a Specific Wi-Fi Network Isn’t Showing Up
There’s a chance you’ve found this article when you were searching for reasons why a specific Wi-Fi option isn’t showing up even though others do. The easiest fix here is to reset the router and your computer for good measure.
You can also log in to the router’s settings page and make sure that “broadcast SSID” is switched on so that the network is visible.
If the network is showing up, but you can’t connect to it, try forgetting it:
- Open the Start Menu.
- Select the Settings Cog.
- Choose Network & Internet, then choose Wi-Fi.

- Select Manage known networks.

- Choose the Wi-Fi network, and then choose Forget.

You’ll have to re-enter the password for the network, but in many cases where network settings have become corrupted or changed, forgetting the network will solve the problem.
12. Update Windows
Microsoft regularly updates Windows 11 with new features, bug fixes, and performance enhancements. Unfortunately, there are so many computers out in the world that inevitably some computers will develop problems thanks to a Windows update.

If your Wi-Fi issues started after a recent update, check the web for any indication that other users are also experiencing this issue. If it looks like the problem is related to an update, check out How to Uninstall and Reinstall Windows Updates. Then remove that update and check for updates that resolve the issue.
13. Enable the Wi-Fi Icon in the Group Policy Editor
If you’re using Windows 11 Pro and your Wi-Fi icon is missing altogether, it might be that a setting in the editor has changed. If your computer is administered by someone in the company you work for, you’ll need to ask them to check. Then again, if you have access to an IT department you should ask them to fix your Wi-Fi issue in the first place!
- Press Windows + R to open the Run dialog box.
- Type gpedit.msc and press Enter.

- In the Group Policy Editor, go to User Configuration.
- Now select Administrative Templates -> Start Menu and Taskbar.
- Look for Remove the networking icon and open it.

- Select Disabled in the top left of the Window, if it wasn’t disabled already.

- Select OK and restart your computer.
If this Policy was already disabled, don’t change or save anything else in the Group Policy Editor, just close it and try a different solution.
No More Wireless Worries.
This is a long list of fixes, but you should have a working wireless connection again unless something genuinely odd has gone wrong with your Wi-Fi. To make that Wi-Fi connection even better, check out 10 Ways To Boost a Weak WiFi Signal.