최신 펜 드라이브에 필요한 것보다 훨씬 적은 저장 공간이 표시되면 누구나 당황합니다. 범인은 일반적으로 파일 형식(file format) 입니다.
드라이브를 포맷하는 동안 NTFS(NTFS) , FAT32 및 exFAT와 같은 옵션이 발생했을 수 있습니다 . 이 모든 파일 형식 은 무엇을 (file format)의미(s mean) 합니까? 어떻게 다른가요? 그리고 가장 중요한 것은 USB 드라이브 에 가장 적합한 (USB drive)파일 형식(file format) 은 무엇입니까?

파일 형식 소개
USB 드라이브에 어떤 (USB)파일 형식(file format) 이 더 좋은지 논의하기 전에 파일 형식(file format) 이 무엇을 하는지 이해해야 합니다 . 다른 파일 시스템은 어떻게 다릅니까? 휴대용 저장 장치에 대한 특정 표준이 다른 표준보다 나은 이유는 무엇입니까?
파일 할당 테이블(The File Allocation Table)
가장 간단한 파일 형식(file format) 은 조회 테이블(lookup table) 입니다. 드라이브에 있는 모든 파일의 위치를 유지하므로 운영 체제(operating system) 에서 전체 저장소를 반복적으로 검색할 필요 없이 파일을 빠르게 찾을 수 있습니다.
이것이 바로 첫 번째 파일 형식 을 (file format)File Allocation Table 또는 FAT 라고 부르는 이유 입니다. 기본 원칙은 FAT12(FAT12) , FAT16 및 FAT32 형식으로 더 많은 저장 공간을 추가하는 것 외에 여러 해 동안 동일하게 유지되었습니다 .

그러나 시간이 지나면서 FAT 표준(FAT standard) 은 그 시대를 보여주기 시작했습니다. 이 형식은 악성 코드에 너무 취약했으며 데이터 손상에 대한 중복성을 구현하는 데 거의 실패했습니다. 이는 운영 체제(operating system) 의 시스템 파일을 보관 하는 하드 드라이브(drive meant) 의 중요한 문제였습니다 .
새로운 세대의 파일 형식(A New Generation of File Formats)
Microsoft와 Apple(Microsoft and Apple) 이 각각 자체 운영 체제용으로 개발한 NTFS(New Technology File System) 및 HFS+ (Hierarchical File System) 와 같은 파일 시스템 은 하드 드라이브에 저장된 데이터 의 보안과 신뢰성 을 보장하는 데 특화되어 있습니다. (security and reliability)이것은 자연스럽게 FAT32 보다 우수하지만 휴대용 저장 장치에는 너무 비효율적입니다.
SD 카드나 USB 드라이브와 같은 장치는 쓰기를 위한 간단한 파일 시스템(file system) 이 필요하고 큰 오버헤드가 없습니다. 불행히도 NTFS(NTFS) 와 같은 파일 형식은 성능 이점을 제공하지 않고 제한된 리소스를 너무 많이 사용합니다.
이것이 ex FAT 가 들어오는 곳입니다. (FAT)FAT 의 효율적이고 실용적인 구조 와 최신 드라이브 용량을 결합하여 모든 종류의 휴대용 장치가 최소한의 오버헤드로 데이터를 관리할 수 있도록 합니다. 앞으로 살펴보겠지만, ex FAT 는 (FAT)USB 드라이브(USB drive) 와 같은 작은 저장 장치(storage device) 를 포맷하는 데 가장 적합합니다 .
제한된 선택: NTFS and HFS+
Windows 를 사용하는 경우 하드 디스크 드라이브 가 (disk drive)NTFS 파일(NTFS file) 시스템 을 사용하여 포맷되었을 수 있습니다. NTFS 는 가장 현대적인 파일 형식으로(file format) 향상된 보안과 안정성(security and reliability) 을 제공하기 때문에 매우 좋습니다 .

NTFS 의 유일한 문제 는 상당히 중요한 "오버헤드"입니다. ” 간단히 말해서 (” Simply)NTFS 의 핵심에 있는 파일 테이블(file table) 이 너무 많은 공간을 차지합니다. 파일 시스템(file system) 은 Windows 를 염두에 두고 설계 되었지만 운영 체제(operating system) 를 부팅하지 않는 소형 저장 장치(storage device) 의 경우 최선의 선택이 아닐 수 있습니다.
HFS+ 도 비슷한 문제를 겪고 있습니다. 이것은 Mac PC(Mac PCs) 용 독점 파일 시스템(file system) 이며 Apple 컴퓨터 에서만 작성하고 액세스할 수 있습니다 . 이것은 대부분의 시스템이 USB 스틱(USB stick) 의 데이터 를 읽을 수 없기 때문에 휴대성을 손상 시킵니다. 또한 NTFS 와 마찬가지로 파일 형식 중에서 가장 효율적인 저장 장치가 아닙니다.
레거시 옵션: FAT32
파일 할당 테이블 또는 FAT(File Allocation Table or FAT) 는 가장 오래된 파일 시스템(file system) 이자 가장 간단한 파일 시스템입니다. 개선된 버전인 FAT32 는 최근까지 대부분의 컴퓨터 및 저장 장치 의 기본 파일 형식 이었습니다.(default file format)

그것이 인기를 얻지 못한 이유는 간단합니다. 4GB 이상의 저장 공간이 있는 장치는 지원할 수 없습니다. 수십 기가바이트의 메모리를 제공하는 USB 드라이브로 인해 FAT32 는 더 이상 실행 가능한 선택이 아닙니다.
그러나 해당 표시를 넘지 않는 오래된 펜 드라이브를 포맷하려는 경우 FAT32 가 좋은 선택이 될 수 있습니다. Windows , Macintosh 및 Linux 를 포함한 모든 플랫폼에서 읽고 쓰기 쉽습니다 . NTFS 만큼 안전하지 않을 수 있지만 휴대용 저장 장치(storage device) 에는 문제가 없습니다 .
최고의 형식: exFAT
Microsoft 가 (Microsoft)FAT32 를 대체하기 위해 NTFS 파일(NTFS file) 형식을 출시 했을 때 모두가 열광한 것은 아닙니다 . USB 드라이브나 SD 카드와 같은 (USB)작은 저장(Small storage) 장치 는 NTFS 의 큰 데이터 오버헤드로 인해 어려움을 겪었고 더 얇은 것을(something slimmer) 원했습니다 . FAT32 와 비슷 하지만 최대 저장 크기(storage size) 가 더 큽니다 .
그리고 마이크로소프트(Microsoft) 는 귀를 기울였습니다. exFAT 파일 형식(exFAT file format) 은 임베디드 시스템용 파일 시스템(file system) 으로 출시되었습니다 . FAT32 형식(FAT32 format) 의 확장 버전으로 최대 128PB의 저장 공간을 지원합니다( 곧 저장 장치(storage device) 에 의해 침해될 가능성이 없음 ).

FAT32 와 마찬가지로 exFAT는 매우 공간 효율적인 파일 형식(file format) 으로 작동하는 데 최소한의 시스템 리소스가 필요합니다. 이것은 시스템 파티션에 묶이지 않고 실제 사용을 위해 모든 저장 공간을 짜낼 수 있으므로 휴대용 저장 장치에 적합합니다.
또 다른 장점은 Macintosh(Macintosh) 에서도 지원된다는 것입니다 . Mac PC는 exFAT (Mac)USB 드라이브 를 읽고 쓸 수 있어 드라이브와 Windows 간에 이식성을 제공합니다 . Linux 시스템의 경우 몇 가지 단계를 더 거쳐야 할 수도 있지만 여전히 가능합니다.
(Which File Format Should)USB 드라이브(USB Drives) 에 어떤 파일 형식을 사용해야 합니까 ?
exFAT 형식은 USB(USB) 드라이브 에 가장 적합한 파일 형식(file format) 입니다 . 빠르고 효율적이며 NTFS 보다 오버헤드가 훨씬 적습니다 . FAT32와 달리(Unlike FAT32) 4GB로 제한되지 않아 대용량 펜 드라이브에 적합합니다.
구형 USB 드라이브의 경우 FAT32 도 적절한 선택입니다. 저장 용량(storage capacity) 이 4GB를 초과하지 않는 한 FAT32를 사용하여 드라이브를 안전하게 포맷 할(FAT32) 수 있습니다. 이것은 훨씬 더 넓은 범위(wider range) 의 이식성과 함께 exFAT의 효율성을 제공할 것입니다.
(FIle)NTFS or HFS+파일 형식 은 작은 저장 장치에 적합하지 않습니다. 대신 운영 체제(operating system) 를 부팅하고 컴퓨터를 실행하는 데 사용하는 내부 또는 외부 하드 드라이브에 사용해야 합니다.
What Is the Best File Format for USB Drives?
Everyone gets bummed when their latest pen drive displays much less storage than it should have. The culprit is usually the file format.
You have probably encountered options like NTFS, FAT32, and exFAT while formatting a drive. What do all these file formats mean? How do they differ? And most importantly, which is the best file format for a USB drive?

An Introduction to File Formats
Before discussing which file format is better for USB drives, we need to understand what the file format does. How do different file systems differ? What makes a specific standard better for portable storage devices than others?
The File Allocation Table
At its simplest, a file format is a lookup table. It holds the location of every file on the drive, allowing the operating system to quickly locate any file without having to scour through the whole storage repeatedly.
This is why the first file format was just called the File Allocation Table, or FAT as you may have heard of it. The basic principle remained the same for many years, merely adding more storage with the FAT12, FAT16, and FAT32 formats.

With time, however, the FAT standard started showing its age. The format was too vulnerable to malicious code and did little to implement redundancies against data corruption. These were critical issues for a hard drive meant to hold system files for an operating system.
A New Generation of File Formats
File systems like the NTFS (New Technology File System) and HFS+ (Hierarchical File System), developed by Microsoft and Apple respectively for their own operating systems, are specialized to ensure the security and reliability of the data stored in the hard drive. While this naturally makes them superior to FAT32, it also makes them too inefficient for portable storage devices.
Devices like SD cards or USB drives need a simple file system to write to and do not have a large overhead. Unfortunately, file formats like NTFS tie up too much of their limited resources without offering performance advantages.
This is where exFAT comes in. It combines the efficient, no-nonsense structure of FAT with modern drive capacities, allowing all manner of portable devices to manage their data with minimal overheads. As we will see, exFAT is the best for formatting a small storage device like a USB drive.
The Contrstrained Choices: NTFS and HFS+
If you’re on Windows, your hard disk drive is probably formatted using the NTFS file system. This is great, as NTFS is the most modern file format out there, offering improved security and reliability.

The only problem with NTFS is the rather significant “overhead.” Simply put, the file table at the core of NTFS occupies too much space. The file system is designed with Windows in mind, but for a small storage device not meant to boot an operating system, it might not be the best choice.
HFS+ suffers from similar issues. It is the proprietary file system for Mac PCs, and as such can only be written and accessed by an Apple computer. This hurts portability, as most systems cannot read the USB stick’s data. Also, like NTFS, it is not the most storage efficient of file formats.
The Legacy Option: FAT32
The File Allocation Table or FAT is the oldest file system and the simplest one. Its improved version, FAT32, was the default file format for most computers and storage devices until recently.

The reason it fell out of favor is simple; it cannot support devices with more than 4 GB of storage. With USB drives offering dozens of gigabytes in memory, FAT32 is no longer a viable choice.
But if you are looking to format an old pen drive that does not cross that mark, FAT32 can be a good choice. It is easy to read and write on all platforms, including Windows, Macintosh, and even Linux. It might not be as secure as NTFS, but it does just fine for a portable storage device.
The Best Format: exFAT
Not everyone was enthused when Microsoft rolled out the NTFS file format as a replacement for FAT32. Small storage devices, like USB drives or SD cards, suffered due to the large data overhead of NTFS and wanted something slimmer. Something more like FAT32, but with a larger maximum storage size.
And Microsoft listened. The exFAT file format was released as the file system of choice for embedded systems. It is an extended version of the FAT32 format, supporting storage up to 128 PB (unlikely to be breached by any storage device soon).

Just as FAT32, exFAT is a very space-efficient file format, requiring minimal system resources to function. This is great for portable storage devices, as it allows them to squeeze out every ounce of storage for actual use rather than getting it tied up in system partitions.
Another advantage is that it is supported by Macintosh as well. Mac PCs can both read and write to exFAT USB drives, allowing portability between it and Windows. For Linux systems, you might need to jump through a few more hoops, but it is still doable.
Which File Format Should You Use for USB Drives?
The exFAT format is the best file format for USB drives. It is fast, efficient, and has a much smaller overhead than NTFS. Unlike FAT32, it is not limited to 4 GB of storage, making it suitable for high-capacity pen drives.
For older USB drives, FAT32 is also a decent choice. As long as the storage capacity does not exceed 4 GB, you can safely use FAT32 to format the drive. This will give you the efficiency of exFAT with a much wider range of portability.
FIle formats like NTFS or HFS+ aren’t ideal for small storage devices. Instead, you should use them for internal or external hard drives you use to boot an operating system and run the computer.